Archive | Cosmetic

Optimum Percent Liquinox

Q. What is the optimum percent liquinox detergent to use?
A. As a general statement, optimum detergency is reached at a 1% concentration (optimum defined as amount of soil removed per unit of detergent used).

Read the full story

Posted in Cosmetic, Liquinox, Manual Lab Cleaning, Medical Device, Pharmaceutical0 Comments

CIP

How much CIP detergent needed?

Q: We are starting a new bioprocessing facility where we will be cleaning stainless steel tanks via a Clean-In-Place sprayball system? How do I approximate how much detergent I will need? We are considering Alcojet or Solujet, follow by an acidic rinse with Citrajet. Is this a good plan? Any advice? A: A good rule of thumb for tis you need about….

Read the full story

Posted in Biotechnology, Citrajet, Cosmetic, Keylajet, Pharmaceutical, Solujet0 Comments

No Interference in Flavors and Fragrance

Q. Why are critical cleaners essential in flavor and fragrance industries? A. Many major flavor and fragrance companies use Alconox or Liquinox detergent to soak, scrub or sonicate their manufacturing equipment. The reason they use these detergents is that they are free of all flavors, fragrances, dyes, cationic biocides or disinfectants, and emollients that might leave residues. This way…

Read the full story

Posted in Alconox, Ask Alconox, Cosmetic, Food & Beverage, Liquinox0 Comments

Guidelines for Triple Rinsing

Q. is there any industry guidance on triple rinsing…any literature that you know of that this is the accepted standard for manual cleaning that you could provide me?
A. To our knowledge, there are no authoritative source documents to define how many times you should rinse glassware. The logic behind a triple rinse is that, in filling and emptying a vessel three times with water, each time you are diluting by 2 orders of magnitude. In theory . . .

Read the full story

Posted in Cosmetic, Laboratory, Medical Device, Pharmaceutical0 Comments

All About Rinse Aids

There are basically three kinds of rinse aids: Hydrophobic rinse aids that leave behind a residue, surfactants that wet surfaces and allow rinse water to sheet off a surface without leaving behind droplets, and acid rinses that dissolve insoluble alkaline salt residues.

Read the full story

Posted in Biotechnology, Citrajet, Cosmetic, Environmental, Laboratory, Medical Device, Metalworking & Precision Manufacturing, Pharmaceutical, SolujetComments Off on All About Rinse Aids

Cleaning a V Blender

Q. How would you clean a 3 cu ft V blender?
A: I recommend using a 0.5% Solujet® solution of 12 L to clean the 3 cu ft V blender followed by 2 rinses and then a 3rd sampling rinse. You may wish

Read the full story

Posted in Cosmetic, Medical Device, Pharmaceutical, Solujet0 Comments

Clean Salicylic Acid Lotions From Equipment

Q. What can be used to manually clean salicylic acid lotions, creams, emulsions from manufacturing equipment?
A. In general salicylic acid is best cleaned by sodium phosphate or alkali citrate salt containing cleaners. Lotions and creams are often best cleaned by high alkaline cleaners.

Read the full story

Posted in Alcojet, Alconox, Cosmetic, Detonox, Liquinox, Pharmaceutical, SolujetComments Off on Clean Salicylic Acid Lotions From Equipment

Determining Optimum Detergency for Liquinox

How do you determine optimum detergency for Liquinox detergent? As a general statement, optimum detergency is reached at a 1-2% concentration (optimum defined as amount of soil removed per unit of detergent used). Maximum detergency is typically reached at a…

Read the full story

Posted in Cosmetic, Detergents, Featured, Liquinox, Medical Device, PharmaceuticalComments Off on Determining Optimum Detergency for Liquinox

Detonox 1 gallon

What is Detonox detergent?

Q: You recently recommended Detonox detergent for a tough cleaning challenge we had. You rushed a sample over and it worked fantastically. I have review your technical bulletin, but is there anything else you can tell me about it? Is it better than Alconox and Liquinox? It seems great.

A: Thank you for the feedback and question…..

Read the full story

Posted in Biotechnology, Cosmetic, Detonox, Manual Lab Cleaning, Medical Device, Pharmaceutical0 Comments

Cosmetics Manufacturing Cleaning

Concentrated for economical use, Alconox, Inc. detergents make critical cleaning for cosmetic applications faster, easier and more efficient. Whether you’re scrubbing 1,500-gallon kettles or wrestling with plastic tubes and fillers, proven detergents such as CITRANOX, TERGAZYME, and ALCONOX wash away the most tenacious materials without leaving residues.

Read the full story

Posted in Articles, Cosmetic0 Comments