Tag Archive | "pharma residue"

Manual Cleaning A 100 Gallon Mixer

Q: We are looking for detergent and process recommendations for manual cleaning of a 100 gallon mixer. We make one product in the mixer which contains water, modified food starch, acidic buffers, sucralose and preservative. Currently when cleaning, we boil for 1 hour at 90°C, then cool, drain and soak in cool water while using the mixing blades.  Scrub brushes and a spray hosing follows that. The mixer is made from stainless steel.

Read the full story

Posted in Alconox, Citranox, Liquinox, PharmaceuticalComments (2)

Cleaning Pharmaceutical Probiotics

Q: Can you tell me if Liquinox can clean/remove pharmaceutical probiotics? We use this product to clean our packaging lines. We have a customer who is looking to have us package their probiotic product.

A: Liquinox® Critical Cleaning Liquid Detergent is an excellent emulsifier of organic and oily residues. It will do the job. Best practice, however, would be to incorporate a powerful emulsifier of organic and oily residues, along with enhanced protein removal. 

Read the full story

Posted in Biotechnology, Liquinox, Pharmaceutical, TergazymeComments (0)

Cleaning a Dry Powder V-Mixer

We are cleaning a V Mixer made of NSF Stainless steel and we are using it to mix different protein powders, amino acids, and herbs for dietary supplements. It is small enough to be cleaned by hand but not small enough for any type of sink. I was advised to buy your Citranox product. Is that the best detergent for this job?  

Read the full story

Posted in Citranox, Pharmaceutical, TergazymeComments (0)

Cleaning Vitamin Residues

Q. We manufacture vitamins, which include minerals (calcium, magnesium etc.) and have found that Citranox is very effective in cleaning the residue left in our equipment. Unfortunately, we have learned that the pH of Citranox is too low for our local requirements. Do you have another detergent with a higher pH that would work equally as well?

Read the full story

Posted in Alconox, Detonox, PharmaceuticalComments (0)

Clean-in-place (CIP) with Citrajet Detergent

Q. Our pharmaceutical company is transferring product manufacture to a different one our facilities. We used a CIP cleaning process with Citrajet and are going to have to perform validation and verification tests again. What information do we need for our testing? Chemical properties might be helpful as well as the science on how this chemical works. We would also need information on disposal and the requirements for allowing this to flow to normal process drains.

Read the full story

Posted in Citrajet, Keylajet, Pharmaceutical, Solujet, ValidationComments (0)

Pharma Ointment Residue via CIP

Q. We are a generic pharmaceutical manufacturer of Creams and Ointments. We are having difficulty cleaning equipment (specifically CIP) after making these types of products. We have been successful in cleaning 95% of our products using the alkaline detergent. We have couple of products that leave a white film after the cleaning cycles. These products do not contain metal oxides. We are planning to try the Citranox acid cleaner. Any suggestions?

Read the full story

Posted in Citrajet, Citranox, PharmaceuticalComments (0)