soaking

Q. It appears that the Solujet is leaving a ring on some of the labware that cannot be removed. What is this ring (sodium silicate?)? How do we remove it? The labware has not been completely submerged. We have just added the Solujet soak for some labware that may have stubborn organics. We have been giving the labware a 4 hour soak in 1% Solujet, followed by warm tap water rinse then wash with Liquinox followed by 3x DI rinse.

Click for the Answer.

We are using a bath of Alconox powder for cleaning several metallic parts.  We have found that both the concentration of Alconox, along with a set duration brings about the correct end result.  As the wash solution is created at the beginning of each working shift, a gradual ‘weakening’ of the process occurs. In some instances, we resort to manually replenishing the tank with a fresh mix mid-shift.  Would you have any general advice?

Q: We understand from your literature, that pre-soaking in a solution prior to washing is a good idea.  We are washing pipettes in a syphon washer using your Alcotabs.  Can we create an Alcotabs solution for the pre-soak?  A 1%?…

Q. Some of our glassware was left soaking in Alconox or Alconox and then bleach for a long period of time. Is this okay? A. Laboratory glassware that is completely submerged in an Alconox® solution is generally ok even with extended soaking. However, if you leave the laboratory glassware partially submerged…