Archive | Liquinox

Is Liquinox Drain Safe?

Q. In reviewing the SDS for Liquinox, we noticed that it says “Should not be released into the environment. Prevent from reaching drains, sewer or waterway.” How do you recommend we rinse components if Liquinox should not reach the drain?

A. The section you mention in the SDS for Liquinox® Critical Cleaning Liquid Detergent , 6.1, refers to untreated drains (i.e. the street) and other direct-to-environment pathways. The drains from labs, manufacturing plants and the like will have septic and/or treatment processes prior to the environment. In fact, we often…

Read the full story

Posted in Liquinox0 Comments

Reducing Foam in Ultrasonic Cleaning

How do we go about reducing foam suds in our 1% Liquinox ultrasonic bath? We have 3 ultrasonic tanks in our series process. Bath 1 has the 1% solution. Bath 2 and 3 are a rinsing cascade system with RO water only. The foam is building up in tank 1 and then transfers to tank 2.

Read the full story

Posted in Liquinox, Manual Lab Cleaning, Medical Device, Metalworking & Precision Manufacturing, Ultrasonic0 Comments

Laboratory Cleaning: Best Practices Using a Household Dishwasher

Q. Our lab just has a regular household dishwasher that we use to clean labware. I heard this is not ideal, but it’s what we have. We’re using Alcojet detergent, but the instructions say to turn it into a liquid by diluting….

Read the full story

Posted in Alcojet, Alconox, Laboratory, Liquinox0 Comments

Using High Foam Detergent in an Automated Ultrasonic Cleaning Line

Q. Can we use high-foaming detergents in an automated cleaning line?
A. Yes, but using a high-foam detergent requires a rinse chamber that allows foam to rinse off and drain easily and completely. If the automated line uses initial spray rinsing right after the wash tank

Read the full story

Posted in Citranox, Cosmetic, Liquinox, Medical Device, Pharmaceutical0 Comments

Best Detergent for Polyamides

As you likely know, the Ixef® PARA is part of polyamide family and, as such, has an inherent chemical resistance. While Ixef® compounds display a good resistance to chemical reagents, the amide function in the resin matrix makes them sensitive to certain chemicals. Therefore, we like to recommend….

Read the full story

Posted in Liquinox, Manual Lab Cleaning0 Comments

Ultrasonic Cleaning: Detergent Bath Life

Q: We manufacture medical devices. Can we use our Alconox or Citranox bath solution more than once? How do we know that we need to change the solution?

A: For the highest level of cleanliness, you only use a solution once. In general, in a medical device manufacturing and cleaning operation, a detergent bath will typically easily last for 8 hours.

For example, you can make up a fresh Alconox® or Citranox® solution once a day and then verify that the pH has not changed more …

Read the full story

Posted in Alconox, Citranox, Liquinox, Medical Device0 Comments

How to Clean Laboratory Glassware

Clean laboratory glassware is essential in all laboratories. No scientist, engineer, laboratory technician, or analyst has time to fail an experiment because of contaminated glassware.  

Good, well-built, precision detergents (like the Alconox, Inc. portfolio of course) can make up for quite of bit incomplete, inefficient or incorrect glassware cleaning techniques.

Read the full story

Posted in Alconox, Laboratory, Liquinox, Tergazyme, Video0 Comments

Continuous processing protein

Alconox, Inc. Detergents and Continuous Bioprocessing

Q. How can Alconox detergents assist with our movement to continuous bioprocessing? A: Continuous bioprocessing is an exciting newcomer to the biotech realm. It has been used in industries such as food and chemicals for some time, effectively so. With improvements in cell culture perfusion, and the many forms of disposable technologies on the market, footprints can be reduced making continuous processing for biotech products a reality for many applications.

Read the full story

Posted in Biotechnology, Citrajet, Detonox, Filter, Liquinox, Solujet, Tergazyme0 Comments

Brix vs. Conductivity: Measuring Ultrasonic Bath Concentration

Several years ago, our plant was directed to use the Refractive Index as a method of letting us monitor bath concentration during ultrasonic cleaning with your Liquinox detergent. More recently, our factory in Asia switched to Liquinox and were directed to use a conductivity measurement to monitor concentration. I decided to measure our cleaning bath using both methods and found a discrepancy — the brix (Refractive Index) reading was slightly above 1% concentration, but the Conductivity reading was nearly 2% concentration.

Read the full story

Posted in Liquinox, Manual Lab Cleaning, Metalworking & Precision Manufacturing0 Comments

Alconox Liquinox

Differences between Alconox and Liquinox

Q. Currently using Alconox, but are considering a switch to liquinox. We have seen less residuals with Liquinox, which is desireable. What are the recommendations and concerns with switching from Alconox to Liquinox? What are the difference in ingredients between the two?
A. Alconox and Liquinox are functionally equivalent cleaners, but are not chemically identical. Click to learn more and access the Liquinox and Alconox msds.

Read the full story

Posted in Alconox, Ask Alconox, Laboratory, Liquinox, Manual Lab Cleaning, Medical Device, Pharmaceutical, Validation0 Comments