Tag Archive | "mold release"

Cleaning Glass Castings: Alconox or Detonox?

Q. Q. We are having an issue plating aluminum on glass castings. It appears there is mold release left on the glass after the casting. The glass manufacturer recommended Alconox detergent. Is that what you would your recommend for cleaning the glass? Whatever we use, it probably needs to be a soak at a high temperature (>170°)? Is this procedure good or should we use an ultrasonic at the higher temperature?

Read the full story

Posted in Detonox, Metalworking & Precision ManufacturingComments (0)

Ultrasonic Cleaning of Glass Molds (Detergents vs. Alkali)

Q. We have heard that Alconox is recommended for glass mold cleaning. Other than release agent, can the product also remove oxidation from the mold surface? And finally, why is the concentration on the Alconox detergent only 1-3% when we typically use concentrations of 20-30% when cleaning molds with sodium or potassium hydroxide based chemicals?

A. Alconox® Powdered Precision Cleaner is what we tradtionally recommend for mold release cleaning applications, but many also find Detonox® Ultimate Precision Cleaner to be particularly effective.

When it comes to removing oxidation…

Read the full story

Posted in Alconox, Citranox, Detonox, Medical Device, Metalworking & Precision ManufacturingComments (0)

One Detergent for Mold Release and Circuit Board Cleaning?

Q: What types of Alconox, Inc. detergent would I use to clean a mold release agent? As an aside, is there any chance I could use the same detergent to also clean copper traces off a printed circuit board?

A: Yes! You may indeed be able to use one detergent in both these cleaning applications. But it will only work if the copper is not in the form of an oxide. Here’s why.

Read the full story

Posted in Alconox, Detergent 8, Detonox, Electronic, Metalworking & Precision ManufacturingComments (0)