Tag Archive | "ultrasonic cleaning"

Reducing Foam in Ultrasonic Cleaning

How do we go about reducing foam suds in our 1% Liquinox ultrasonic bath? We have 3 ultrasonic tanks in our series process. Bath 1 has the 1% solution. Bath 2 and 3 are a rinsing cascade system with RO water only. The foam is building up in tank 1 and then transfers to tank 2.

Read the full story

Posted in Liquinox, Manual Lab Cleaning, Medical Device, Metalworking & Precision Manufacturing, UltrasonicComments (0)

Using High Foam Detergent in an Automated Ultrasonic Cleaning Line

Q. Can we use high-foaming detergents in an automated cleaning line?
A. Yes, but using a high-foam detergent requires a rinse chamber that allows foam to rinse off and drain easily and completely. If the automated line uses initial spray rinsing right after the wash tank

Read the full story

Posted in Citranox, Cosmetic, Liquinox, Medical Device, PharmaceuticalComments (0)

Brix vs. Conductivity: Measuring Ultrasonic Bath Concentration

Several years ago, our plant was directed to use the Refractive Index as a method of letting us monitor bath concentration during ultrasonic cleaning with your Liquinox detergent. More recently, our factory in Asia switched to Liquinox and were directed to use a conductivity measurement to monitor concentration. I decided to measure our cleaning bath using both methods and found a discrepancy — the brix (Refractive Index) reading was slightly above 1% concentration, but the Conductivity reading was nearly 2% concentration.

Read the full story

Posted in Liquinox, Manual Lab Cleaning, Metalworking & Precision ManufacturingComments (0)

Ultrasonic Cleaner for Parts and Towels

I’m looking for a cleaning solution to use in our industrial ultrasonic cleaner that is similar to the old style competitor detergent. We use it occasionally for general cleaning, removal of machining oils, cleaning for high vacuum use, and to lightly etch the oxides off of copper. 

If we did a pre-mix and let it sit until use, how long would the formulations last before degrading?

Could we also use this mix for washing microfiber towels and foam sponges that have various waxes, polymer sealants and oils on them?

Read the full story

Posted in Alconox, Liquinox, Metalworking & Precision Manufacturing, UncategorizedComments (2)

Ultrasonic Cleaning of Glass Molds (Detergents vs. Alkali)

Q. We have heard that Alconox is recommended for glass mold cleaning. Other than release agent, can the product also remove oxidation from the mold surface? And finally, why is the concentration on the Alconox detergent only 1-3% when we typically use concentrations of 20-30% when cleaning molds with sodium or potassium hydroxide based chemicals?

A. Alconox® Powdered Precision Cleaner is what we tradtionally recommend for mold release cleaning applications, but many also find Detonox® Ultimate Precision Cleaner to be particularly effective.

When it comes to removing oxidation…

Read the full story

Posted in Alconox, Citranox, Detonox, Medical Device, Metalworking & Precision ManufacturingComments (0)