Detojet, Low-Foaming Liquid Detergent
Q. What industries commonly use Detojet and what residues does Detojet remove?
A. Detojet, Low-Foaming Liquid Detergent is used in a variety of industries such as Healthcare, Laboratory, Precision Manufacturing and Metalworking and Food & Dairy. Detojet is an alkaline non-ionic cleaner that would remove soil, tares, resins, grease, blood, tissue, oils, particulates, chemicals, and solvents.
For more information on Detojet, please see the technical bulletin or the Detojet msds.
Triclosan and Triclocarban contamination
Q. We are experiencing contamination issues with both triclosan and triclocarban with our LC/MS/MS instrument. We need to determine if either of these compounds are a component of Liquinox or Detojet
Cleaning Aluminum without Corrosion
Q. How is galvanic corrosion prevented when cleaning aluminum?
A. Aluminum is an active metal that is somewhat high on the “anodic index” of the galvanic series. If aluminum is cleaned with other metals present, you can create a battery and get galvanic corrosion. Aluminum should not be cleaned in the presence of metals that are significantly higher or lower on the anodic series; higher on the anodic scale such as zinc, magnesium or beryllium metals and lower on the anodic scale such as tin, brass, bronze, copper, silver, nickel and rhodium.
Cleaning Aluminum with Alconox
Q. Which Alconox cleaners can be used on Aluminum?
A. The Alconox brand cleaners recommended for cleaning aluminum are Alconox, Liquinox, Tergazyme, Alcojet, Alcotabs, Detojet, Citranox, Luminox, Citrajet, Solujet and Tergajet. Detergent 8 is not recommended for cleaning aluminum. Aluminum forms a natural passive layer in air that allows it to be successfully cleaned without adverse reactions with cleaner. A passive layer forms in under an hour, provided there is no oily film present. Once the passive layer is formed, the recommended Alconox brand cleaners can be used to clean the aluminum at concentrations of less than 5% at 90 deg C or less for up to one hour.
Cleaning Aluminum & Chelate Blush
When cleaning aluminum, it is assumed that the aluminum has been exposed to air and has formed the typical aluminum oxide layer prior to cleaning. If recently machined, aluminum must be cleaned and it cannot be allowed to air passivate. Therefore, a cleaner that contains appropriate metasilicate inhibitors such as Solujet, Detojet, Alcojet or Tergajet must be used.