Citranox

Q. Water insoluble tablet coatings used for solid dose enteric pharmaceutical tablets are very difficult to clean from coating equipment. It was hard to validate the equipment and prevent cross contamination.

A. The use of hot 140 deg F 2% Citranox for manual cleaning allowed succesfull removal of water insoluble salts used in these coatings. The references in the Pharmaceutical Cleaning Validation References PDF will help you with validation. And if you have a question for our experts about critical cleaning, please visit Ask Alconox.

Q: We are looking for detergent and process recommendations for manual cleaning of a 100 gallon mixer. We make one product in the mixer which contains water, starch, acidic buffers, sucralose and preservative. Currently when cleaning, we boil for 1 hour at 90°C, then cool, drain and soak in cool water while using the mixing blades.  Scrub brushes and a spray hosing follows that. The mixer is made from stainless steel.

We are looking to clean epoxy coated Neodymium donut magnets. Any oils or contaminants need to be removed prior to epoxy coating. What recommendations can Alconox Inc. provide?

We’re an environmental lab and need a detergent that can remove organic and inorganic residue while also being as green as possible. We had heard Liquinox or Luminox might be good choices. Which would be better? Are there other recommendations as well?

Q. What effect will Citranox have on brass? A. Citranox will brighten brass