Is Liquinox Drain Safe?
Q. In reviewing the SDS for Liquinox, we noticed that it says “Should not be released into the environment. Prevent from reaching drains, sewer or waterway.” How do you recommend we rinse components if Liquinox should not reach the drain?
A. The section you mention in the SDS for Liquinox® Critical Cleaning Liquid Detergent , 6.1, refers to untreated drains (i.e. the street) and other direct-to-environment pathways. The drains from labs, manufacturing plants and the like will have septic and/or treatment processes prior to the environment. In fact, we often…
Cleaning Carbon Tool Steel
Q. How to clean mild tool steel tablet press punches and dies?
A. Mild tool steel, sometimes called S7, will flash rush during rinsing, particularly if you rinse with hot water. All the cleaners that have good chelating agents (all but Luminox and Detergent 8) can safely clean tool steel because the chelating agents tie up the iron oxide and do not let it auto-catalytically expand and form rust.
Reducing Foam in Ultrasonic Cleaning
How do we go about reducing foam suds in our 1% Liquinox ultrasonic bath? We have 3 ultrasonic tanks in our series process. Bath 1 has the 1% solution. Bath 2 and 3 are a rinsing cascade system with RO water only. The foam is building up in tank 1 and then transfers to tank 2.
Laboratory Cleaning: Best Practices Using a Household Dishwasher
Q. Our lab just has a regular household dishwasher that we use to clean labware. I heard this is not ideal, but it’s what we have. We’re using Alcojet detergent, but the instructions say to turn it into a liquid by diluting….
Using High Foam Detergent in an Automated Ultrasonic Cleaning Line
Q. Can we use high-foaming detergents in an automated cleaning line?
A. Yes, but using a high-foam detergent requires a rinse chamber that allows foam to rinse off and drain easily and completely. If the automated line uses initial spray rinsing right after the wash tank