Laboratory

Q. Why is it important to pre-soak pipettes in 1% Alconox or Liquinox before washing in pipette siphon washer with Alcotabs?
A. The most common problem in pipette cleaning is residues that dry on after use and prior to cleaning. This problem is attributed to the failure to pre-soak the pipettes immediately after use. Our technical experts at Alconox recommend placing soiled pipettes in 1% Alconox or Liquinox solution immediately. Learn More.

My question is related to a minimum detergent concentration.  We manually wash labware of all sizes in 0.3% Liquinox solution. We also pre-wash or pre-rinse the labware and control our parts load.  We rarely have failures. We want to change our protocol to extend the wash water use for one day instead of based on a numerical parts load.  Do you think a 0.3% Liquinox concentration is sufficient detergent capacity to go an entire day?

I work in a lab here in London, and we are washing lab glassware (molecular biology/bacteria) with a standard home dishwasher. We do not have access to distilled water for rinsing, and our water is very hard. Will Citrajet be okay under those conditions? Also, do you have a distributor for Citrajet in the UK?

The washer unit we are using at our hospital appears to have had it’s Pasteur-Sol detergent made no longer available. What does Alconox, Inc. recommend to replace it? We were using a powdered detergent.

I am using reusable cell culture tubes for boiling urine samples at 121°C with 8M NaOH solution. After this application, there is a white stain inside, which I can’t scrub off. I used Alconox at the concentration on the container: 3-5 Tbsp/gal. I’ve soaked them, scrubbed them, and then also sonicated in a cold Alconox solution for 30 min….