Search

Search
Generic filters

Ultrasonic Cleaning of Plastic Implants

Q. After machining plastic implants, what is the recommendation for an in process cleaning using a small ultrasonic tank?
A. The recommendation would be to use 1% Liquinox (a mild alkaline, emulsifying and dispersing cleaner) at a temperature well within the temperature tolerance of the plastic.

Does Tap Water Rinse as Well as Purified Water?

Q. Does tap water rinse as well as purified water? A. As far as detergency is concerned, tap water will rinse just as well as any purified water. Rinsing is a mass displacement mechanism and…

Re-cleaning Medical Device Vendor Parts

Q. Current procedure calls for an ultrasonic bath at 69C for 20 mins with Liquinox® and DI water. Then calls for another such DI bath at 69C with NO detergent for 20 mins. Then a 1 min DI water flushing. Is Liquinox appropriate? When I clean the parts, they have already been cleaned by vendor in the exact same manner, essentially I re-clean them. Is this overkill?

Come See Alconox, Inc. at INTERPHEX 2017

Join us in NY, NY on March 21-23, 2017 for INTERPHEX — the premier pharmaceutical, biotechnology, and medical device development and manufacturing show. Come visit our booth, #2226 to receive our unique gifts, expert technical support for critical cleaning applications, and detergent samples.

Wikipedia

Removing Silicone Oil from Polyimide Surfaces

Q. How do you remove silicone oil from polyimide surfaces during a lamination process (polyimide bonded to Inconel metal foils)? The oil is only contacting the polyimide. What can be used to clean this polyimide surface that will leave behind no residue?

X

Not finding what you need?

For further assistance please fill out the form at Ask Alconox or email us at cleaning@alconox.com.