Join Alconox, LLC at CPhI North America In Philadelphia
Join Alconox, LLC at CPhI North America at the Pennsylvania Convention Center in Philadelphia August 10-12, 2021
We are really excited to be heading to Philadelphia for CPhI North America.
Our cleaning experts will be on-hand to answer all your medical device cleaning questions. Plus, we’ve got some very cool new merchandise we’ll be handing out.
Advanced Cleaning Mechanisms: Different Ways Detergents Clean
We are running some cleaning trials with several of your detergents in our lab on a difficult to remove resin. There was no indication of solvating with solid flakes and particles of resin crashing to bottom. Can you provide an alternative detergent? Detergents are a synergistic blend of several cleaning ingredients (as opposed to soap). Ways detergents clean therefore….
Running SIP After Cleaning
Q: We are using Tergazyme to control biofilm residues. Works great. Can you think of any issues that might arise if we run a steam/pressure “kill cycle” after cleaning with the Tergazyme cycle is completed?
A: Tergazyme® Enzyme-Active Powdered Detergent is an excellent part of a biofilm control regimen. A thorough rinse will leave no residue left behind to speak of that might interact with your SIP kill cycle. After all,
Pharmaceutical Cleaning Validation Via Worst Case Matrix
Simplify Validation Using a Worst Case Matrix
To simplify validations, it is recommended that a matrix of worst case equipment to clean and worst case residues to remove be created. Start by first assembling an equipment matrix and residue matrix that defines all shared and dedicated equipment with what residues they are exposed to. By conducting testing, it is possible to identify and document a “worst case”, for the most difficult to clean equipment and residues.
Advanced Cleaning Mechanisms: Metallic Parts, Bath Monitoring
We are using a bath of Alconox powder for cleaning several metallic parts. We have found that both the concentration of Alconox, along with a set duration brings about the correct end result. As the wash solution is created at the beginning of each working shift, a gradual ‘weakening’ of the process occurs. In some instances, we resort to manually replenishing the tank with a fresh mix mid-shift. Would you have any general advice?
