Detergents

Q. We are a waste treatment plant with an in-house ultrafiltration system. We keep experiencing rapid fouling of our filters causing an excessive need to take the system out of service for cleaning. We suspect that microbes are growing inside the system and rapidly clogging the pores of the filter. We have tried hot NaOH flushes and we see little to no improvement on the filter permeability and very poor permeability recovery.

Making an indoor gun range safe from lead dust is possible with proper air ventilation and proper cleaning procedures that focus on lead abatement. When it comes to lead dust, it’s important to never dry sweep or shovel bullet debris. Wet cleaning, with proper lead dust cleaner is also essential.

Unlike A LEADING CIP CLEANER, Solujet has high wetting surfactants that enhance emulsifying, wetting, dispersing and rinsing. The surfactants allow faster, more efficient cleaning and easier rinsing.

Q. We are seeing white residue on clear anodized aluminum that we are cleaning with Detojet. Why is this happening and what can we do to prevent it?
A. There are a few reasons this may be happening. 

Possible Reason 1: The Detojet® Low Foaming Liquid Detergent concentration may be too low in the wash cycle and the concentration of calcium, magnesium and iron too high in the water used.  This would result…

Q. Do you have a recommended swab detection method for residual detergent?

A. We most certainly do.  It is suggested to use a swabbing area of 5 cm X 5 cm. Where extreme low level acceptance criteria on a low recovery residue, i.e. some product residues, it can help to….