Detergents

Q. What industries commonly use Detojet and what residues does Detojet remove?
A. Detojet, Low-Foaming Liquid Detergent is used in a variety of industries such as Healthcare, Laboratory, Precision Manufacturing and Metalworking and Food & Dairy. Detojet is an alkaline non-ionic cleaner that would remove soil, tares, resins, grease, blood, tissue, oils, particulates, chemicals, and solvents.
For more information on Detojet, please see the technical bulletin or the Detojet msds.

Q. What are two Alconox brand cleaners are low foaming and USDA approved for cleaning food contact surfaces?
A. Alconox, Inc. manufactures cleaners for food contact surfaces with no interfering residues.

Q. Is it possible to prolong the bath life of Alconox?

A. Yes. Start out with a stronger Alconox concentration. If using a 1% solution, use a 2% or possibly even 3% solution. After 1.5 weeks, add another 1.5% Alconox to the bath, especially if there has been make-up water added because of drag-out and evaporation. This regimen should allow successful cleaning for up to 3 weeks. It is not recommended trying to run an Alconox bath beyond 3 weeks, as these baths are prone to starting to grow microbes. Keep the bath covered when not in use and change out the bath every 3 weeks.

Q. Which Alconox brand cleaners are suitable for the removal of iron sucrose?
A. Iron Sucrose is water soluble therefore it can be cleaned by either Citranox or Liquinox. Find out more about Citranox and Liquinox by downloading technical bulletins or MSDS at www.alconox.com.

Q. We’re getting some residue from foaming of detergent on our semiconductor handling equipment.
A. To clean semiconductor handling equipment in electronics, use a warm 3% Detergent 8 (30 mL/L) solution followed by a deionized water rinse to clean the equipment. Detergent 8 is free of any metal ion ingredients such as sodium that can dope a semiconductor.