Equipment used in pharmaceutical manufacturing must be cleaned before each use, and the cleaning procedure used must be in accordance with good manufacturing practices (GMPs). There are different types of CIP including, single pass systems and recirculation system. No matter which type is used, Alconox, Inc. provides support to meet cGMP regulations and detergents ideally suited for CIP systems.
Visit Alconox, Inc. at PACK EXPO International and Healthcare Packaging EXPO 2018, at McCormick Place in Chicago, October 14-17, 2018. Mention Code: 72W43 for free registration to the event.
Once at the show, stop by Booth W-803 to receive our unique gifts, expert technical support for your critical cleaning applications, and detergent samples.
Q. Can we use high-foaming detergents in an automated cleaning line?
A. Yes, but using a high-foam detergent requires a rinse chamber that allows foam to rinse off and drain easily and completely. If the automated line uses initial spray rinsing right after the wash tank
Q. Our parts washer uses a 2.5 hour cycle following a manual wash. A build up of silicone grease is observed. Our preference is to reduce manual cleaning. Is there a cleaning agent available that can remove silicone grease that would be compatible with a parts washer using water as the cleaning agent?
Q. What is the best way to monitor for bath life extension?
A.To avoid potential for cross contamination, only freshly made up cleaning solutions should be used for the highest levels of critical cleaning. In general, a pH change of 1 unit towards neutral indicates an exhausted cleaning solution. Bath life can be extended. Learn How.
Not finding what you need?
For further assistance please fill out the form at Ask Alconox or email us at cleaning@alconox.com.